Catalogue page

Fencing assembly instructions

1 Assembly diagram

Install the galvanized stand.
Figure 1 - Install the galvanized stand.
Insert fencing post
Figure 2 - Insert fencing post.
Drill the post and fix it with countersunk head screws on to the support bracket
Figure 3 - Drill the post and fix it with countersunk head screws on to the support bracket.
Inserimento doghe
Figure 4 - Insert “privacy” or “Vedo non vedo” slat.
Chiusura
Figure 5 - Close the top of the post with the end cap.
NB: to fix the end cap and A the U-shaped profile, use screws or two-component epoxy glue.
Complete diagram
Figure 6 - Complete diagram
Assembled Fencing
Figura 7 - Assembled Fencing
Dilatazione termica
Figura 8 - Leave 0,5 mm of space in the post for the thermal expansion of the WPC Bamboo slats

2 Insertion of a clamp with steel rope for very high fences

For very high fences: we recommend the insertion of a clamp with steel rope in the internal channel of the slat to further reinforce the fence.

Stainless steel clamp 304 21x21x10mm
Figura 9 - Stainless steel clamp 304 21x21x10mm
Insertion of a clamp with steel rope
Figure 10 - Insertion of a clamp with steel rope
Insertion of a clamp with steel rope
Figure 11 - Insertion of a clamp with steel rope
Insertion of a clamp with steel rope
Figure 12
Insertion of a clamp to end post
A: Stainless-steel rope 304 Ø 5mm
Insertion of a clamp to post
A: Height no less than 20mm - B: Slot on slat